GT pneumatic lining fluorine clip butterfly valve
Nominal pressure: 0.6MPa-1.6MPa
Body material: ductile cast steel, cast steel, alloy steel, stainless steel
Applicable temperature: fluorine rubber: -20℃～200℃
Applicable medium: water, air, natural gas, oil and weak corrosive fluid
Overview of pneumatic lining clip butterfly valve
Pneumatic lining clip butterfly valve with fluorine on the spherical sealing surface lining PTFE lining butterfly plate, valve is easy to operate, tight sealing performance, long service life; can be quickly cut off or adjust the flow of. Pneumatic valves are suitable for applications requiring reliable sealing and good regulation characteristics.
One: About Pneumatic lining clip butterfly valve
Pneumatic lining clip butterfly valveWith a spherical sealing surface of PTFE lined butterfly plate, the valve is easy to operate, tight sealing performance, long service life, can be used for quick cutting or regulating flow. Pneumatic valves are suitable for applications requiring reliable sealing and good regulation characteristics. The valve body adopts split type, and the sealing at both ends of the valve shaft is controlled by the rotation base plate of the butterfly plate and the valve seat with fluorine rubber, and the valve shaft is not contacted with the fluid medium in the cavity. Transport is widely used in a variety of different types of industrial liquid and gas in the pipeline, there are serious corrosive media occasions, such as: sulfuric acid, hydrofluoric acid, phosphoric acid, chlorine, alkali, aqua regia and other strong corrosive media.
Two: pneumatic lining fluorine butterfly valve main features
1, The design is novel, reasonable, unique structure, light weight, fast opening and closing.
2, Small operating torque, easy operation, labor-saving and smart.
3, It can be installed in any position and convenient for maintenance.
4, Seals can be replaced, sealing performance is reliable, to achieve two-way sealing, zero leakage.
5, Sealing materials aging resistance, corrosion resistance, long service life and so on.
Three: Pneumatic lining fluorine clip butterfly valve standard
| Design standard | GB/T2238-1989 |
| Flange size | GB/T9113.1-2000;GB/T9115.1-2000;JB78 |
| Structural length | GB/T12221-1989 |
| Pressure test | GB/T13927-1992;JB/T9092-1999 |
Four: Pneumatic lining fluorine clip butterfly valve technical parameters
| DN(mm) | 50～1600 | ||
| PN(MPa) | 0.6 | 1.0 | 1.6 |
| Sealing test(MPa) | 0.66 | 1.1 | 1.76 |
| Strength test(MPa) | 0.9 | 1.5 | 2.4 |
| Applicable temperature | Fluorine rubber：-20℃～200℃ | ||
| Applicable medium | Water, air, natural gas, oil and weak corrosive fluids | ||
| Leakage rate | Meet GB/T13927-92 standards | ||
| Drive mode | Pneumatic | ||
| Configuration actuator | GT, AT, AW series single and double acting pneumatic actuators | ||
| Control mode | Switch two bit control, 4 ~ 20mA analog signal control | ||
Five: Pneumatic lining fluorine butterfly valve main parts and materials
| Part name | Material Science |
| Valve body | Ductile cast steel, cast steel, alloy steel, stainless steel |
| Disc | Grey iron, ductile cast steel, cast steel, stainless steel and special materials |
| Seal ring | All kinds of rubber, PTFE |
| The stem | 2Cr13, stainless steel |
| Filler | O ring and flexible graphite O |
